- Home
- All Products
- Paper Laminating Machine
- ZFM-1080C Automatic Lamination Machine With Chain Cutter and Powder Remover
Functional Advantages:
ZFM-1080C Automatic Vertical Laminator Machine is multifunction type, which can apply to glue base lamination and thermal film lamination with high speed.
Chain cutter system is suitbale for all kinds of film lamination, imported chain brings accurate separation without film margin.
Brush powder remover plus heating roll powder remover can effectively remove dust of the paper surface,increase the brightness of the film lamination and save glue consumption.
Electrical appliance component is centralized controlled by programmable system, touch screen system is easy for operation. Bulky heat conducting oil roller inner circulation system with hydraulic laminating system guarantee high speed lamintion.
ZFM-1080C Automatic Lamination Machine With Chain Cutter and Powder Remover
Configuration & Functions:
1.Automatic Feeder: Adopts offset feeder with advanced pneumatic side lay , which fastest can feed around 15000 sheet/h. Non-stop and pre-stack feeding can effectively improve work efficiency.
2.Overlapping Regulator: Servo-controlled overlap with front lay guarantee accurate and stable.
3.Drying And Heating System: Bulky drying roll with special IR heating layout inside, which can heat the roll faster and saving 40% energy. Large heating roll by oil heating, which can lead to high working speed(65-70m/min).
4.Main Machine Body: Thick machine body (25mm thickness) enhances stability and control.
5.Man-Machine Interface System: Advanced 10inch color screen with PLC system make the operation easy and convenient.
6. Anti-Curvature Device: Avoid paper curvature and make the paper smooth, especially for thin paper.
7. Corrugrated Delivery: Better and easy for collecting paper.
8. Automatic Stacker: Non-stop with IR sensor, intelligently requlate the height of pile without stop the machine as well as counter the sheets.
Maintenance-free offset feeder with high speed and noiseless, servo controlled feeder and a photoelectric sensor to ensure that paper is continuously fed into the machine.
Servo controller for front lay to control the overlapping deviation within ±2mm,side Lay Mechanism guarantees precise paper alignment at all times.
Chain cutter system apply to all kinds film lamination in accurate separation without film margin.
10 inch color touch screen, easy for setting parameter and the operator can check the machine running status.
Pneumatic perforating device with disc cutter and can be regulated as the size of paper. Pneumatic separation system mainly designed for BOPP film without margin.
Especially design for thin paper, which can reinforced hardness and collects paper easily.
Non-stop paper collection mechanism with automatic waste discharge, reduce unplanned downtime and improve efficiency. Three-sided tidy dam-board makes the paper pile well-groomed.
1. Sheet Feeder
The machine is equipped with high precision side lay and front lay, that’s makes the overlapping keep same and every sheet can keep pace in high speed. The overlap width can be regulated from 3mm to 40mm.
Install air shaft for film unwinding with film blade for waste film rewinding. The machine adopts dual glue rollers with drawknife, which can save much glue and remain stable. Generally speaking, it requires about 10-15g/m2 of glue. (By the way, we also can offer glue).
Big drying roller by electric heating(Φ800mm ), we adopt IR lamps with specific layout, that can makes the roller heating faster and save 40% power.
Heating roller by oil heating(Φ380mm ), that makes the temperature to 180℃ and can keep constant temperature in high speed laminating.
Pressure rubber roller (Φ300mm ), with automatic pressure regulation, which makes the laminating effect perfectly without bubbles、spots or wrinkle.
Color touch screen with PLC system, all the machine units keep abreast and easy for operation.
With touch screen, and keep same step with machine by PLC System. IR Probe for detecting the paper sheets. Imported Chain machine the sheet without margin and with high speed.
Absorb glue automatically and easy for cleaning.
Rotate blade cutter for OPP film with pneumatic sheet separating, that’s makes the laminated sheets without margin, and prepare for next process.
| Max. sheet size | 1080*1000mm |
| Min. sheet size | 350*295mm |
| Paper thickness | 80-500Gsm |
| Height of feeding pile | 1060mm |
| Height of stacker pile | 1060mm |
| Machine speed | 80m/min |
| Working speed | 50-70m/min |
| Machine power | 60kw |
| Working power | 20-25kw/h |
| Dimension of machine | L13500×W2800×H2650mm |
| Machine weight | 8000kg |
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
.jpg?imageView2/1/w/100/w/100)
